Babyplast 6/12 6/25 HY LSR - 10/12 10/25 HY LSR
Horizontal Machines

Babyplast 6/12 6/25 HY LSR - 10/12 10/25 HY LSR

The smallest LSR injection molding machine. Starting to mold LSR with Babyplast allows you to reduce tooling and mold costs.

Request Quote →
  • Precision micro-molding for high-quality plastic components
  • Italian quality · manufactured with superior craftsmanship
  • Expert support · consultation and technical assistance available

Overview

All movements are hydraulic

All the machine's movements are controlled by a high-efficiency motor pump unit (driven by an inverter), located in the oil tank and easily inspectable.

Special machine plans

The original design of the machine plates allows the assembly of only the dies, thus significantly reducing the size and cost of the moulds.

Movements

The press is governed by two microprocessors that monitor and manage the movements, times and temperatures of the production cycle.

Proportional Hydraulics

Thanks to proportional hydraulics, the pressures during the cycle phases are managed and memorized by the machine.

Maximum security

CE certification.

Mold safety

Approaching in low pressure.

Color touch screen display

USB output and Ethernet connection (Modbus TCP)

Cooling Management

The amount of coolant flow at various points in the press can be adjusted using a flow meter.

Heating the mold

Thanks to the use of cartridge heating elements and the insertion of a thermocouple for each mold part (fixed and moving), it is possible to achieve a uniform temperature of the dies with minimal energy expenditure. Two mold temperature control zones are available on the machine and can be managed via the display. Maximum allowable temperature is 220°C. The machine plates are cooled.

Decentralized injection

The injection unit has two injection positions: one central and one 25 mm lower. In the case of a single impression, where central injection is not possible (for aesthetic reasons), the cavity can be kept central to the planes by injecting on one side.

Key Features

  • 8″ backlit LCD touch screen display
  • Vacuum function management in the mold
  • Cooled machine nozzle with pneumatic shutter for direct injection onto the workpiece
  • 3 versions of use: 0.5kg premixed cartridge – 1kg mixer with dispenser (cartridges A and B) – 20kg mixer with dispenser (containers A and B)
  • 10 different languages selectable
  • Pages can be easily consulted thanks to the multifunction keys
  • Quality control on 4 cycle parameters
  • PID temperature control
  • 4 temperature control zones, with differentiated mould temperature regulation (fixed and mobile part)
  • Manages and stores over 1000 production cycles
  • USB output program backup
  • Ethernet connection: Modbus TCP
  • Pressure control with electronic transducer
  • Injection position and closure control with linear transducers
  • Proportional hydraulics
  • Soundproofed motor pump unit controlled by inverter
  • Euromap 67 card (option)
  • Savings in mold construction thanks to the machine die-holder plates
  • Low running costs – installed power 3kW – cooling approximately 120 l/h
  • Decentralized injection – 5 pistons from 3 to 15 cc with pressures from 2650 to 815 bar
  • Output for auxiliary control
  • Cooling circuit (6 zones)
  • Temperature tolerance band
  • Hydraulic extraction with extractor return control sensor
  • Jack management and air blowing

Related Machines

View all Horizontal Machines →
Babyplast 10/12 - 10/25

Babyplast 10/12 - 10/25

Babyplast 10/12 - 10/25 is the smallest fully hydraulic injection molding machine, specialized in the molding of high-precision microcomponents.

Babyplast 6/12 6/25 LSR - 10/12 10/25 LSR

Babyplast 6/12 6/25 LSR - 10/12 10/25 LSR

The smallest LSR injection molding machine. Starting to mold LSR with Babyplast allows you to reduce tooling and mold costs.

Babyplast Hybrids - 6/12, 6/25, 10/12, 10/25

Babyplast Hybrids - 6/12, 6/25, 10/12, 10/25

The "Hybrid" versions (6/12Hy and 6/25Hy) are equipped with an injection system driven by a brushless motor, managed by an inverter and with encoder-controlled position.

Next steps

Interested in the Babyplast 6/12 6/25 HY LSR - 10/12 10/25 HY LSR?

Our team can help you evaluate if the Babyplast 6/12 6/25 HY LSR - 10/12 10/25 HY LSR is the right fit for your application. Request a quote or schedule a demonstration.

Request quote →View all Horizontal Machines
Email
sales@albaent.com
Phone
(909) 941-0600
Location
508 W 69th Street · Loveland, CO 80538